Dual Tour NO Tour Pac

Dual Touring Saddle for 1998-2005 Road Glide, 1997-2005 Electra-Glide & 2006 CVO Electra-Glide


Configurator 

#HDFLH97-DT-E-VR – Dual Touring Saddle, No Tour Pak, Heated

#HDFLH97-DT-VR – Dual Touring Saddle, No Tour Pak

Click the “Design It” button to explore. You will be taken to our visual design tool where you can experiment and share it with your friends, add it to your shopping cart or just play around for a bit.


Quick Order

Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the “Add To Cart” button.

 

Clear

£395.00£1,195.00 Inc. VAT

    Reset options

Select the checkbox next to all parts you would like added to your cart. Please be sure to select your cover options, if applicable, before clicking the "Add to basket" button.


MORE INFO: International Ordering | Materials | Glossary | F.A.Q.

 Privacy Policy | Follow Us: Instagram 

Description

Often imitated, but never duplicated, Corbin’s popular Dual Tour is now available for use with a Corbin Passenger Backrest, Chrome V-Rail and optional Seat Heaters. This model provides you and a passenger with the most comfort and support available. Our sculpted seating gives proper weight distribution to allow long range comfort. Generously contoured platforms eliminate hot spots and centralized pressure that causes discomfort. On the inside, Corbin’s exclusive Comfort Cell® foam material gives firm support that conforms to your body over time for a personalized fit. Naturally, we keep a nice flowing line on the bike that integrates with the vintage theme.

This newly designed version of our Dual Touring Saddle accepts two removable rider’s backrests. Backrests are fully adjustable for a tailored fit to your posture and install or remove easily as desired. In the front we have engineered the backrest to fold down to make it easier to mount your bike. This special hardware, which is built into the saddle, also allows the backrest position fore and aft to be adjusted to your stature. Once the backrest is installed, both of these adjustments can be performed without removing the saddle from the motorcycle.

You can use a single Corbin backrest that transfers front to back as needed or get two backrests for full time use. Installation of the Corbin backrest is easy enough to make this possible at a moments notice. Since the saddle is designed to work with a Corbin backrest in the rear, it will not install properly on your bike if you have an HD Tour Pac mounted. We have, however, designed the Dual Touring Saddle to work with the “detachable” sissy bar / passenger rest available from Harley-Davidson. We even make a coordinated backrest pad to complete the look (#RK-PAD).

The ergonomic design of the Dual Touring saddle also gives a nice flowing shape on the bike for a clean look. To add to the vintage appeal of the Dual Tour, we’ve integrated hardware for our Chrome V-Rail. With just four included bolts, our show quality chrome rail bolts directly up to the saddle with no additional hardware. This provides an added bit of flair and really compliments the nostalgic look of the baggers. For a very clean installation, you can also replace your stock seat tab screw with one of our Chromed Billet thumbscrews. A very nice look and tool free installation!

For the ultimate luxury for those early morning rides try our heated seating option. A single switch controls the heat for both the rider and passenger positions. The switch is conveniently located along the left side of the saddle so you can reach it without taking your hand off the throttle. The two position switch allows you to select a heat level depending on conditions. Once on, the level of heat is controlled automatically by a thermostat built into the control unit under the saddle. Of course, it is very simple to install into your stock wiring.

Specification

Unique Technology
The design and manufacture of Corbin products is so unique that Mike Corbin himself holds more than 60 United States Patents! From the process itself to new innovations like the Corbin Glovebox, you can count on highly functional and unique products that work. Corbin products are manufactured under one or more of the following US Patents: 6,848,156 B2; 6,729,516 B2; D 489,540S; 6,655,740 B1; 6,422,648 B1; 5,544,937; 5,608,957; 4,953,911; D545,073S & 6,971,714 B1.


Fibertech™ Basepan
A purpose built, hybrid material that provides a firm foundation to support the carefully designed ergonomics of the Corbin saddle. Provides a precision fit to every arc and contour of the machine and rides on rubber bumpers to protect your paint. We always design our basepans as flat as possible so bumps or odd shapes don’t telegraph through the foam to your body.


Comfort Cell® Foam
The heart of the Corbin saddle! Our exclusive, purpose built foam material, called Comfort Cell, was created to provide a firm, resilient ride that doesn’t break down. This means it will support you for long days on the road. Over time, Comfort Cell will break in to provide a personalized fit to your posture and even greater comfort!


Ergonomic Shaping
A major part of the design criteria of the Corbin saddle is the Ergonomic shape. This means the saddle’s foam shape is designed to emulate the curves of the human body. This provides more square inches of body contact and helps to eliminate hot spots. This shaping also neutralizes the seating platform to help curb sliding in the saddle which reduces fatigue.


Patented Manufacturing Technology
Always an innovator, Mike Corbin invented Integrated Molding technology which is now the process by which all Corbin saddles are made. This process allows extremely tight tolerances and creates a chemical bond between the foam and base material. To see what this is all about.


Genuine Leather
We use leather in all panels of the seat that contact your body. This provides a luxurious ride that breathes with your body. Leather will also break in along with the foam shape to support the personalized fit. Available in a wide range of textures and styles to suit your taste.


Corbin Backrest System
The first and most versatile removable backrest system available for motorcycles! Corbin’s backrests provide added vertical back support and long range comfort. Supported by internal hardware for a very clean look. Backrests adjust to rider’s profile for a tailored fit and install or remove easily as desired. A very popular option!


Electric Heat
As an option we can include electric heat in this saddle! This option provides a true bit of luxury for when the temperature starts to drop. Simple to install with major components pre-built into the saddle. Just wire in the included pigtail and you’re ready to roll.

Warning! Heater elements should never be installed in motorcycle seats used by riders that cannot sense heat.

Accessories

Saddle Cream®
Take good care of your new seat and it will take care of you! Perfect for all your leather goods.
> Learn More <


Thumbscrews
Makes seat installation and removal a tool-free snap! Machined one piece stainless steel provides a very clean look. Available in many popular sizes
> Learn More <


Chrome V-Rail
Triple-plate chromed for a show quality finish, the V-Rail provides a nice nostalgic look.
> Learn More <


Standard Ovalbac®
Our most popular backrest is the perfect blend of form and function. Nine inches of support.
> Learn More <


Standard Backrest
Similar to the Standard Ovalbac, but without the hole. Available Chrome studs too.
> Learn More <


Ovalbac Edge
Edge Ovalbac to compliment bikes with more angular lines. Eight inches of support.
> Learn More <


Ovalbac Large
Like the Standard Ovalbac with more support. 10″ H x 12.5″ W contact area.
> Learn More <


Ovalbac Tee
Extra large support cut away to provide clearance for passenger’s legs. 13 inches tall.
> Learn More <


Ovalbac Gunfighter
The functionality of a backrest with the smallest appearance possible. Provides eight inches support.
> Learn More <


Gunfighter
Often used as a rider’s backrest in Gunfighter seat models. Provides eight inches of vertical back support.
> Learn More <


Corbin Glovebox
Glove Box bolts up to your Standard model backrest (#297-SB & #02-SB) to provide four liters of locking storage.
> Learn More <


Furniture
Barstools & auto designs. Ready for a Corbin seat inside your house? A big hit for the man cave!
> Learn More <

Notes

Measurements:

  • Rider Seating, standard: 14″ wide x 17″ long
  • Passenger: 12″ wide x 13.5″ long

Dual Touring Saddle installs easily with a tongue in the front and a single screw into your fender at the rear. To simplify installation and add a nice touch, we offer a chromed billet thumbscrew in a variety of thread sizes (optional). Your bagger will use either a 1/4″ x 20 or 1/4″ x 28 thread.

There are two versions of our Dual Touring saddle. The model on this page is specifically designed for bagger owners who do NOT have a Tour Pac on their motorcycle. If you have an H-D trunk on your bike or are planning on adding one later, please refer to our other Dual Touring model located HERE.

This saddle does NOT fit the FLHX model!

Will work with detachable sissy bar.


Corbin saddles (with very few exceptions) include Genuine Leather Seating to provide a luxurious look and feel….   don’t let anybody tell you that vinyl is just as good! You wouldn’t buy vinyl boots would you?


Warning: Heater elements (when available) should never be installed in motorcycle seats that will be used by riders that cannot sense heat. This could create a hazardous condition.

Warranty

PLEASE NOTE: Corbin products are designed to fit very close to your bike for a clean look. Due to this, other accessories or options can inhibit proper fit. As an example: Tank Consoles (dashes), ignition modules, exhaust systems, sissy bars, etc. If you have accessories installed on your bike, please let us know so we can verify the fit for you.


SADDLE WARRANTY: Basepan, foam and hardware of the Corbin saddle is warranted to the original owner for life. Cover materials, Heaters, Coolers and workmanship are warranted for one year. Product will only be authorized to be shipped back, freight pre-paid, for refining of shape or to replace/rectify defective parts. In cases where the rework requires a new cover, a recover charge will be applied. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization number (RMA).


FIBERGLASS WARRANTY: Structural integrity of Corbin fiberglass components are warranted to the original owner for life. Finish and paint are warranted against manufacturing defect for one year. Damage to product and / or painted surfaces from outside forces or misuse is specifically not covered under warranty. Cash or credit refunds are not available. All goods being handled for customer service consideration must be accompanied by a Corbin receipt and a Return Material Authorization (RMA) number.
A note about paint color matching, PLEASE READ


EXPORT SALES: USA pricing shown. When products are shipped throughout the world, you will see higher prices because of freight, customs, duty & applicable taxes. Please consider these costs when purchasing Corbin products outside the USA. If ordering direct from Corbin, we will compute freight charges and add them to the order. BUYER will be responsible for customs, taxes, duty or other charges.

Reviews

There are no reviews yet.

Be the first to review “Dual Tour NO Tour Pac”